HTWR / Medical components
Medical cable dimensions: reading the Hongze 2026 brochure
A source-attributed sample of miniature cable and wire dimensions, with product categories kept distinct.
Reference table
Scroll horizontally to view the full table →
| Catalog item | Material / construction | Listed diameter (mm) | Page |
|---|---|---|---|
| Biopsy-forceps cable | 304 / 1×7 | 0.50 | 04 |
| Hemostatic-clip rotating wire | 304 / single wire | 0.38, 0.40, 0.50, 0.59 | 05 |
| Hemostatic-clip rotating cable | 1×7 | 0.45, 0.50, 0.55, 0.59 | 06 |
| Endoscope steering cable | 1×7 | 0.18, 0.21, 0.24, 0.27, 0.30, 0.33, 0.36, 0.40 | 09 |
| Composite-tube braiding wire | Stainless steel | 0.04, 0.05, 0.06, 0.07, 0.08 | 11 |
Source: owner-provided Jiangsu Hongze Medical Brochure, 2026 edition, as transcribed on the linked HTWR medical product page. Listed sizes are discrete examples, not a continuous approved range or confirmation of stock. Sources and scope ↗
Download reference CSV ↓Keep the supply form explicit
A single rotating wire and a stranded rotating cable cannot be identified by diameter alone. Include the catalog category, drawing revision, working length and end geometry in the inquiry. Specify which features are supplied finished and which remain for downstream assembly.
Build an inspection brief with the drawing
List dimensional tolerance, surface condition, cleanliness, packaging and traceability needs. Define functional tests for the supplied component. Where a requested dimension is absent from the brochure, submit it for assessment rather than interpolating between catalog entries.
Common questions
Is an endoscope steering cable the same as a guidewire core?
No. Keep the component category and function distinct, and use the relevant drawing and product page.
Does an industrial wire-rope range apply here?
No. Medical-component dimensions are reviewed against the relevant brochure entry and agreed drawing.
Sources and scope
Reference information supports specification discussions. Confirm the actual supplied product and acceptance criteria with the manufacturing team.