HTWR / INDUSTRIAL CATALOG
7×19 Stainless steel wire rope
7×19 stainless steel cable contains seven strands of nineteen wires. Review 1.5–26 mm metric catalog entries, its cross-section and procurement questions for repeated bending, with notes on unconfirmed brochure data.
This diagram applies to the listed diameters of this construction; it is not a dimensioned drawing. Click to view the full-size image.
Source: brochure printed page 13Selection and application discussion
133 wires and flexibility requirements
7×19 contains 133 wires and is generally more flexible than 7×7 at comparable diameters. It can be considered for cables that must bend. More fine wires do not automatically mean greater breaking force or establish a particular fatigue life.
Information needed for pulley or repeated motion service
Provide pulley groove-root diameter, cable diameter, travel, load range, cycle rate and environmental conditions. Discuss terminations, lubrication or coating at the same time. A 7×19 designation alone does not qualify a cable for an arbitrary small pulley or lifting duty.
Catalog entries and unconfirmed data
Metric entries span 1.5–26 mm; supply range and lead time require confirmation. The source imperial table gives 500 lbs for 7/32 in AISI 302/304 and is flagged as unconfirmed. Do not use that value for selection or comparison before manufacturer verification.
Imperial specifications · Printed page 13
Source label: RRW-410D · Check PDF page 8 ↗
Unconfirmed: the source gives 500 lbs for 7/32 in AISI 302/304, inconsistent with adjacent rows. Retained as printed, not a performance claim.
Scroll horizontally on narrow screens.
| Diameter (in) | Approx. weight (lbs/100ft) | Nominal B.S. · AISI 302/304 (lbs) | Nominal B.S. · AISI 316 (lbs) |
|---|---|---|---|
| 3/32 | 1.74 | 920 | 810 |
| 1/8 | 2.9 | 1760 | 1530 |
| 5/32 | 4.5 | 2400 | 2110 |
| 3/16 | 6.5 | 3700 | 3210 |
| 7/32 | 8.6 | 500 | 4350 |
| 1/4 | 11.0 | 6400 | 5600 |
| 5/16 | 17.3 | 9000 | 8200 |
| 3/8 | 24.3 | 12000 | 11000 |
Metric specifications · Printed page 14
Source label: En12385 · Check PDF page 8 ↗
Scroll horizontally on narrow screens.
| Diameter (mm) | Approx. weight (kg/100m) | Minimum breaking force (kN) |
|---|---|---|
| 1.5 | .86 | 1.28 |
| 2 | 1.52 | 2.27 |
| 3 | 3.43 | 5.12 |
| 4 | 6.10 | 9.09 |
| 5 | 9.53 | 14.21 |
| 6 | 13.72 | 20.46 |
| 8 | 24.38 | 36.37 |
| 10 | 38.10 | 56.83 |
| 12 | 54.86 | 81.84 |
| 16 | 97.54 | 145.50 |
| 18 | 123.44 | 184.14 |
| 20 | 152.40 | 227.34 |
| 26 | 257.56 | 384.20 |
“–” means not provided, not zero. Decimal commas in galvanized tables are displayed as decimal points; blank rows are omitted. Metric tables do not individually identify material or strength grades and are not automatically matched to imperial tables.
Before requesting a quotation
- Material: specify 304, 316 or an agreed grade and the corrosion environment.
- Dimensions and quantity: nominal diameter, tolerance, cut lengths and quantities or reel length.
- Service and acceptance: static or moving use, load, bending conditions, required breaking force and inspection documents.
- Delivery: termination drawings, packing, batch identification, destination and requested timing; confirm stock, minimum order and lead time in the quotation.
Compare other constructions
Related procurement reading
Connect your quotation to the exact catalog record
When citing a specification, identify the metric or imperial table, diameter row and printed brochure page. Flag any value marked unconfirmed; a catalog record is not a statement of current stock or confirmed supply.
State which material documents, dimensional inspections, breaking-load records and batch identifiers your RFQ requires, so the document scope can be agreed.
Review published quality documents · Management-system documents do not certify an individual product specification.